FLO-PAD
-------------------
Manufacturer: Monitortech(USA)
Model: FLO-PAD
The Monitor Flo-Pad bin aerator is a device used to promote the flow of dry bulk powders from a storage vessel without the noise and damaging vibration caused by pneumatic or electric vibrators. The Flo-Pad uses multiple Evassers mounted on a single air plenum chamber inside the vessel and is capable of aerating many types of bulk powders and granular solids in bins, hoppers and silos including some of the most difficult applications.
While the Flo-Pad is able to discharge air at up to 80 psi (5.5 bar) to help dislodge and move settled materials, the single Flo-Pad is used to maintain flowability of material with a constant 2 to 5 psi (0.14 to 0.35 bar) supply of air.
Unlike other types of aerators that use cotton or canvas to diffuse the air, the Flo-Pad uses multiple Evassers, which are less likely to be bound or clogged due to moisture. In addition, the Flo-Pad is not as prone to back-flow of material because the standard neoprene boot on the Evassers expands to let the pressurized air out and contracts when the air is shut off blocking the air outlets from material backflow.
Features
 |
Typical effective radius of 12 inches (305 mm)
|
|
18 in (457 mm) and 60 in (1,524 mm) Flo-Pads available.
|
Technical Data:
|
Air Supply/Consumption:
|
|
|
Air Supply :
|
Continuous clean, dry air 3 to 5 psid (0.2 to 0.35 bar) (the difference between the air feed pressure and the internal vessel pressure)
|
|
|
Air Consumption:
|
Dependent upon quantity of Flo-Pads and air supply manifold size (Refer to bulletin 964A for further information or consult the factory)
|
|
Materials of Construction:
|
|
|
Evasser:
|
Cast iron
|
|
|
Plenum Chamber:
|
Painted Mild steel
|
|
|
Boot (standard):
|
Black Neoprene (up to 175°F/80°C)
|
|
|
Sintered Metal Insert: (optional)
|
Bronze 90 micron (up to 900°F/480°C)
40 micron filter for extra fine materials (up to 900°F/480°C)
SS 90 micron (up to 900°F/480°C)
|
|
Plenum Chamber:
|
|
|
Connection:
|
1"-14 UNS x 2" pipe nipple
|
|
|
Mounting Hole:
|
1-7/16 in (36.5 mm) diameter
|
---------------------------------------------------
ĐẠI LÝ PHÂN PHỐI CHÍNH THỨC TẠI VIỆT NAM | CÔNG TY TNHH TM-DV-KT CAO VIỆT CƯỜNG
Số 89 hẻm 249 Tân Kỳ Tân Quý, P.Tân Sơn Nhì, Q.Tân Phú, HCMC
Tel: 08-3813 4681/Fax: 08-3813 4680
Hotline: 0908 507 021/ 0909 951 237 | Email: sales@caovietcuong.com
Website: www.caovietcuong.com | www.thietbidomuc.com |
